Calculate the TPS of the Quadro 5010M on local AI models
Every model in our catalogue assessed against this card at the context length and minimum quality you choose. Speed is an estimate for a single request, calculated from this card's memory bandwidth and the size of each model once compressed.
Calculated for this card
721 models in our catalogue altogether
Largest model it holds
DeciLM 6B
5.7B · Q3_K_M · 14.2 tok/s
Fastest model
Gemma 4 E2B
35.1 tok/s · 5.1B
Which AI models can run on a Quadro 5010M?
Set the inputs, read the answer
More context means more memory for the conversation cache. Speed is for a fresh conversation and does not change with this setting.
Hides models that would only fit by being compressed below this point.
105 models match
Calculating| Quantisation | Fit | ||||||
|---|---|---|---|---|---|---|---|
|
35.1
tok/s
12–70 · low confidence |
Gemma 4 E2B ≈ | 5.1B | Apr 2026 | 3.4 GB | 11k tokens ? | Q3_K_M | Tight |
|
30.0
tok/s
10–60 · low confidence |
Gemma 3 1B | 1B | Mar 2025 | 1.8 GB | 33k tokens | Q8_0 | Comfortable |
|
30.0
tok/s
10–60 · low confidence |
Gemma 3 QAT 1B | 1B | Apr 2025 | 1.8 GB | 33k tokens | Q8_0 | Comfortable |
|
30.0
tok/s
10–60 · low confidence |
HGRN 1B (WT 103) ≈ | 1B | Nov 2023 | 1.8 GB | 131k tokens ? | Q8_0 | Comfortable |
|
30.0
tok/s
10–60 · low confidence |
LLama 3..2 Typhoon 2 1B ≈ | 1B | Dec 2024 | 1.8 GB | 131k tokens ? | Q8_0 | Comfortable |
|
30.0
tok/s
10–60 · low confidence |
OLMo-1B ≈ | 1B | Feb 2024 | 1.8 GB | 131k tokens ? | Q8_0 | Comfortable |
|
30.0
tok/s
10–60 · low confidence |
Pythia-1b ≈ | 1B | Apr 2023 | 1.8 GB | 131k tokens ? | Q8_0 | Comfortable |
|
27.7
tok/s
10–55 · low confidence |
OpenELM-1.1B ≈ | 1.1B | May 2024 | 1.9 GB | 131k tokens ? | Q8_0 | Comfortable |
|
27.2
tok/s
10–54 · low confidence |
DeciCoder-1B ≈ | 1.1B | Aug 2023 | 1.9 GB | 131k tokens ? | Q8_0 | Comfortable |
|
27.2
tok/s
10–54 · low confidence |
SantaCoder ≈ | 1.1B | Jan 2023 | 1.9 GB | 131k tokens ? | Q8_0 | Comfortable |
|
27.2
tok/s
10–54 · low confidence |
TinyLlama-1.1B (1T token checkpoint) ≈ | 1.1B | Oct 2023 | 1.9 GB | 131k tokens ? | Q8_0 | Comfortable |
|
27.2
tok/s
10–54 · low confidence |
TinyLlama-1.1B (3T token checkpoint) ≈ | 1.1B | Oct 2023 | 1.9 GB | 131k tokens ? | Q8_0 | Comfortable |
|
25.0
tok/s
9–50 · low confidence |
EXAONE 4.0 (1.2B) ≈ | 1.2B | Jul 2025 | 2.0 GB | 131k tokens ? | Q8_0 | Comfortable |
|
25.0
tok/s
9–50 · low confidence |
LFM2-1.2B ≈ | 1.2B | Jul 2025 | 2.0 GB | 131k tokens ? | Q8_0 | Comfortable |
|
25.0
tok/s
9–50 · low confidence |
MinerU2.5 ≈ | 1.2B | Sep 2025 | 2.0 GB | 131k tokens ? | Q8_0 | Comfortable |
|
25.0
tok/s
9–50 · low confidence |
Pleias 1.0 1.2B ≈ | 1.2B | Dec 2024 | 2.0 GB | 131k tokens ? | Q8_0 | Comfortable |
|
25.0
tok/s
9–50 · low confidence |
Pleias-RAG-1B ≈ | 1.2B | Apr 2025 | 2.0 GB | 131k tokens ? | Q8_0 | Comfortable |
|
24.4
tok/s
9–49 · low confidence |
Llama 3.2 1B | 1.2B | Sep 2024 | 2.2 GB | 54k tokens | Q8_0 | Comfortable |
|
24.0
tok/s
8–48 · low confidence |
MiniCPM-1.2B ≈ | 1.2B | Jun 2024 | 2.0 GB | 131k tokens ? | Q8_0 | Comfortable |
|
23.0
tok/s
8–46 · low confidence |
DeepSeek Coder 1.3B ≈ | 1.3B | Jan 2024 | 2.1 GB | 131k tokens ? | Q8_0 | Comfortable |
|
23.0
tok/s
8–46 · low confidence |
DeepSeek-VL-1.3B ≈ | 1.3B | Mar 2024 | 2.1 GB | 131k tokens ? | Q8_0 | Comfortable |
|
23.0
tok/s
8–46 · low confidence |
DigiRL ≈ | 1.3B | Jun 2024 | 2.1 GB | 131k tokens ? | Q8_0 | Comfortable |
|
23.0
tok/s
8–46 · low confidence |
GLA Transformer 1.3B ≈ | 1.3B | Aug 2024 | 2.1 GB | 131k tokens ? | Q8_0 | Comfortable |
|
23.0
tok/s
8–46 · low confidence |
Janus 1.3B ≈ | 1.3B | Oct 2024 | 2.1 GB | 131k tokens ? | Q8_0 | Comfortable |
|
23.0
tok/s
8–46 · low confidence |
Kosmos-2.5 ≈ | 1.3B | Aug 2024 | 2.1 GB | 131k tokens ? | Q8_0 | Comfortable |
Speeds are estimates for a single request — one conversation at a time — calculated from memory bandwidth, model size and quantisation. Real throughput varies with the inference runtime and its version. Figures published by hardware vendors measure many simultaneous requests and are much higher.
On record
Quadro 5010M full specification
Everything on record for this board, ordered by how much it bears on running a language model rather than by how a spec sheet would list it. Memory comes first because it decides the outcome; the rest is context.
Memory
The two specifications that decide what this card can run and how quickly. Capacity sets which models fit; bandwidth sets how many tokens per second they produce once they do.
- Memory size
- 4 GB
- Memory bandwidth
- 83 GB/s
- Memory type
- GDDR5
- Memory bus width
- 256 bit
- Memory clock
- 650 MHz
The chip
Which processor is on the board and how it was manufactured. A smaller process size generally means more performance for the same power.
- Graphics processor
- GF110
- Architecture
- Fermi 2.0
- Generation
- Quadro Fermi-M(x000M)
- Foundry
- TSMC
- Process size
- 40 nm
- Transistors
- 3 billion
- Transistor density
- 5,800 K/mm²
- Die size
- 520 mm²
- Package
- BGA-1981
- Released
- 22 February 2011
Clock speeds
How fast the processor runs. Worth far less here than on a gaming benchmark: generating text is limited by memory bandwidth, so a higher clock barely moves the result.
- Base clock
- 450 MHz
- Boost clock
- 450 MHz
Processing units
What the chip contains. These drive graphics performance and matter mainly for processing a long prompt rather than for producing the answer.
- Shading units
- 384
- Texture mapping units
- 48
- Render output units
- 32
- Streaming multiprocessors
- 12
- L1 cache
- 64 KB
- L2 cache
- 0.5 MB
Theoretical performance
Peak arithmetic rates published for the board. These are ceilings that no real workload reaches, and generating text reaches a small fraction of them because it is limited by memory rather than arithmetic.
- Single precision (FP32)
- 691.2 GFLOPS
- Pixel rate
- 11 GPixel/s
- Texture rate
- 22 GTexel/s
The board
What it takes to physically install and power the card — the practical constraints that decide whether it fits the machine you already own.
- Power draw (TDP)
- 100 W
- Power connectors
- None
- Bus interface
- MXM-B (3.0)
- Slot width
- MXM Module
Software support
Which graphics and compute interfaces the card supports. CUDA compute capability is the one that bears on inference: below 7.0 there are no tensor cores, and modern inference software falls back to slower code paths.
- CUDA compute capability
- 2.0
- DirectX
- 11.0
- OpenGL
- 4.6
- OpenCL
- 1.1
- Shader model
- 5.1
Listings
Where to buy a Quadro 5010M
No vendor is currently listing this card. Listings come from vendors who publish them here directly — browse the vendor directory to see who is selling what.
What the numbers mean
What the memory subsystem means for AI
Memory
4 GB
Bandwidth
83 GB/s
Largest model
DeciLM 6B
Quadro 5010M carries only 4 GB of GDDR5. That limits it to the smaller end of the catalogue, and a model has to fit entirely inside before it generates anything at all. A runtime actually gets about 3.6 GB.
Memory bandwidth reaches 83 GB/s across a bus of 256 bits. Bandwidth is this card's real constraint. Every token requires reading the entire model out of memory, so a large model will feel slow here even when it fits.
That comes from a memory clock of 650 MHz. Widening the bus and raising the clock are the two levers a manufacturer has, which is why a card with unremarkable cores can still generate quickly.
The practical ceiling is DeciLM 6B, 5.7B, compressed to Q3_K_M and generating around 14.2 tokens per second.
The chip and how it was built
Quadro 5010M is built on the graphics processor GF110, using the architecture Fermi 2.0 from NVIDIA, as part of the generation Quadro Fermi-M(x000M).
The chip is manufactured by TSMC, on a process of 40 nm, with a die measuring 520 mm², holding 3 billion transistors. A smaller process generally means more performance for the same power, though for language models it matters far less than the memory subsystem.
It was released in February 2011, roughly 15.558053487573 years ago. Inference software support tends to follow hardware by a year or two, so a card of this age generally has mature, well-optimised code paths available to it.
Compute throughput, and why it matters less than it looks
Clocks run from a base of 450 MHz to a boost of 450 MHz. Worth far less here than on a gaming benchmark: raising the clock speeds up the arithmetic, and the arithmetic is not what generation is waiting on.
Cache and processing units
Quadro 5010M has an L1 cache of 64 KB, backed by an L2 cache of 0.5 MB. Cache absorbs a share of the memory traffic that would otherwise hit the main bus, which is the one place on this page where a number other than bandwidth quietly affects generation speed — a large L2 lets more of the working set stay close to the cores.
There are 384 shading units, 48 texture mapping units, and 32 render output units. These drive graphics workloads and contribute to prompt processing, but they sit idle for much of the time a model spends generating a reply.
Power, size and installation
Power draw
100 W
Quadro 5010M is rated at 100 W. Running a language model keeps a card busy in bursts rather than continuously — it draws hard while generating and idles between requests — so sustained draw over a working day is usually well below the rated figure.
The board occupies mxm module. Worth checking against the case and power supply already in the machine, since the largest cards need considerably more of both than a typical desktop provides.
It connects over MXM-B (3.0). The interface governs how quickly a model is loaded from disk into the card, not how fast it runs once there, so a narrower link costs a few seconds at startup and nothing thereafter.
The extremes
The largest AI models that run on a Quadro 5010M
The biggest open-weight models that fit on this card, newest first. Each is shown at the best compression the card can hold.
The fastest AI models on a Quadro 5010M
Where this card produces tokens quickest. Smaller models dominate here, because generating each token means reading the whole model out of memory once.
Step by step
How to work out the tokens per second of a Quadro 5010M
You do not have to calculate anything by hand — the gputps.com calculator on this page has already worked it out for every model this card can hold. Reading off the answer takes six steps.
-
01
Search for the model you want
The table lists 105 models the card handles. The search box takes a name or a size such as 27b, which matches on parameter count.
-
02
Match the context to your work
Longer conversations cost memory on top of the weights. Against 4 GB so the setting is worth getting right.
-
03
Choose how far you will compress
Each model is shown at the best compression this card can hold. A minimum quality hides the ones that only fit by being squeezed further than you would accept.
-
04
Take the range as the answer
Each speed is an estimate for a single conversation, with a range beneath it. The top end here is 35.1 tok/s on Gemma 4 E2B. The same card and model vary by thirty to fifty per cent between inference runtimes.
-
05
Check the memory column before committing
A tight fit runs but leaves no room to raise the context later; comfortable has headroom. The memory column shows what each model needs against an available 4 GB.
-
06
Cross-check against other hardware
Each model page repeats this calculation for the whole catalogue. Worth a look before deciding: it shows what else runs the same model, alongside Quadro 5010M.
Answers
Quadro 5010M — common questions
Quadro 5010M— how much cache does it have?
The L1 cache is 64 KB, and the L2 cache is 0.5 MB. Cache absorbs part of the memory traffic that would otherwise reach the main bus, so a larger L2 gives a modest lift to generation speed beyond what bandwidth alone predicts.
Quadro 5010M— does it support CUDA?
Yes. It reports CUDA compute capability 2.0, which predates tensor cores. Capability 7.0 and above has tensor cores, which modern inference software uses; below that it falls back to slower code paths for quantised models.
Quadro 5010M— what bus interface does it use?
It uses MXM-B (3.0). This governs how fast a model is loaded onto the card rather than how fast it runs once loaded, so it costs a few seconds at startup and nothing during generation.
Quadro 5010M— is it good for running local AI models?
Its memory limits it to smaller models though its bandwidth means generation will feel slow on larger models. In total it runs 105 of the models we track. Whether that is enough depends entirely on which model you want — the table above answers that directly.
Quadro 5010M— can it run a model that does not fit in its memory?
It can be split, with the overflow held in system memory beyond the card's 4 GB drags the whole thing down, and none of the figures on this page assume it.
Would two Quadro 5010M cards be twice as fast?
Capacity adds, throughput does not. Two of them give you 8 GB of combined memory, at roughly the same generation speed as one.
Quadro 5010M— which AI models can it run?
105 of the 721 open-weight language models we track fit on this card and can be run locally. The table on this page lists every one, with the memory it needs, the quantisation it runs at and an estimated generation speed.
Quadro 5010M— what is the largest AI model it can run?
The largest model in our catalogue that fits is DeciLM 6B at 5.7B parameters, compressed to Q3_K_M. It generates roughly 14.2 tokens per second and needs about 3.5 GB of the card's memory.
Quadro 5010M— how many tokens per second does it produce?
It depends on the model. The fastest model we track here is Gemma 4 E2B at about 35.1 tokens per second, while larger models run proportionally slower because each token requires reading the whole model out of memory once. Speeds are estimates for a single conversation at a time.
Quadro 5010M— how much memory does it have?
This card has 4 GB of GDDR5. Around a tenth is reserved by the inference runtime and the driver, leaving roughly 3.6 GB available for a model and its conversation.
Quadro 5010M— what is its memory bandwidth?
Memory bandwidth reaches 83 GB/s across a bus of 256 bits. This is the single best predictor of how fast it generates text, because producing each token means reading the entire model out of memory once.
Quadro 5010M— what type of memory does it use?
It uses GDDR5 clocked at 650 MHz. HBM types are found on datacentre accelerators and carry far more bandwidth than the GDDR used on desktop cards, which is why they generate tokens considerably faster at the same capacity.
Quadro 5010M— who makes it?
This is a product of NVIDIA, with the chip manufactured by TSMC, on a process of 40 nm.
Quadro 5010M— when was it released?
It was released in February 2011.
Quadro 5010M— how much power does it use?
Rated board power is 100 W. Generating text draws hard in bursts and idles between requests, so average consumption over a working session is normally well below the rated figure.
The other direction
Looking at it from the other side?
This page starts from the hardware. If you already know which model you want and need to know what it takes to run it, start from the model instead.